Manufacturer & Exporter of Stainless Steel Seamless Pipes & Tubes and High Nickel Alloys Seamless Pipes & Tubes

304/L Steel Pipe, 316/L Steel Pipes, 321 Steel Pipes, 904L Tubes, Inconel 625 Tubes, Inconel 825 Tubes, Monel 400 Tubes

Manufacturer, Stockholder, and Exporters of Steel Pipes and Tubes in Seamless and Welded Form

 
» Steel Pipes & Tubes
» Stainless Steel Pipes & Tubes
» ERW Steel Pipes & Tubes
» Carbon Steel Pipes & Tubes
» Alloy Steel Pipes & Tubes
» Mild Steel Pipes & Tubes
» Capillary Pipes
» Steel Coils and Sheet
» Steel Plates
» Forged Pipe Fittings
» Butt Weld Fittings
» Olets & Outlets Fittings
» Flanges
» Steel Round Bars
» Fasteners
» Nickel Products
» Cupro Nickel Tubes
» Hastelloy Products
» Inconel Products
» Monel Products
» Alloy 20 Products
» Alluminium Products
» IBR Approved Products


 

 

 


Manufacturing & Exporting High Quality Steel Pipes and Steel Tubes 

SPECIAL METALS SOLUTIONS INC. is a world-class manufacturer of High Quality Stainless Steel Seamless and Welded Pipes, Tubes & U-tubes.

We offer wide range of products in following Alloys –

Our stock range is pre-tested to stringent testing requirements which ensure that in most cases our stock material is already suitable for your needs. This means that your material can be progressed for dispatch almost immediately.

  • Austenitic Stainless ( Grade: 202, 304, 304L, 304h, 310, 316, 316L, 316Ti, 317L, 321, 347 )
  • Super Austenitic ( Grade:904L, 6Mo )
  • Duplex & Super Duplex ( Grade: 2205, 2207, 32750, 32760 )
  • Nickel Alloys ( Grade: Monel 400, Inconel  625, Incoloy 825, Hastelloy C-276 )

SPECIAL METALS SOLUTIONS INC. , has identified India as a priority area for growth. As a part of this initiative, we had established state-of-the-art manufacturing in India for producing Seamless and Welded Stainless Steel Pipes & Tubes to make available world-class products manufactured in India caters to the niche markets of almost all the emerging sectors like oil and gas, refineries, petrochemicals, process industries, power plants and water distribution.

Our Mother Company was started in the year 1987 and has more than 25 year’s track record of stability, trust & growth. From trading to manufacturing value added steel products, we had pre-eminent position in manufacturing, importation, stocking and supplying Long Stainless Steel segment from India. Accepting challenges and ensuring customer delight has been the hallmark of our group. In just the last two decades, our group has grown to become a multi-product, multi location company providing total piping solutions to a diverse range of industries

PRODUCT RANGE - STAINLESS STEEL SEAMLESS /  ERW TUBES & PIPES IN FOLLOWING ALLOYS -:-

Austenitic Stainless ( Grade: 202, 304, 304L, 304h, 310, 316, 316l,316 Ti, 317,321, 347 )
Super Austenitic ( Grade:904L, 6Mo )
Duplex & Super Duplex ( Grade: 2205, 2207, 32750, 32760 )
Nickel Alloys ( Grade: Monel 400, Inconel  625, Incoloy 825, Hastelloy C-276 )

SIZES :
Outer Diameter: 6.00 mm - 114.30 mm
Wall Thickness : 0.30 mm - 9 mm

LENGTHS :
Length : Upto 12 meters
'U' Tube : Radius 1.1 D to 1 meter
Tubes can be supplied in 600 feet for Diameter below 12.70 mm in coil form.

CONDITIONS
Heat treated • Hard Drawn • Stress Relieved • Bright Annealed • NACE Certified

Grades: TP-304/L/LN/H, TP-316/L/LN/H/Ti, TP-317L, TP-321/H, TP-347/H, TP-405, TP-410, TP430, UNS 31500, 31803, 32205

STANDARDS
ASTM A-213, A-249, A-268, A688, A-269, A-270, A-312, A-789 / 790, SB 165, SB 423, SB 705, SME SB 677 / 673 / 674, EN10216-5, EN10217-7
Other Standards upon request

Seamless Pipes and Seamless Tubes - Our Core product

A pipe is a tubular section or hollow cylinder, usually but not necessarily of circular cross-section, used mainly to convey substances which can flow — liquids and gases (fluids), slurries, powders, masses of small solids. It can also be used for structural applications; hollow pipe is far stronger per unit weight than solid members.
In common usage the words pipe and tube are usually interchangeable, but in industry and engineering, the terms are uniquely defined. Depending on the applicable standard to which it is manufactured, pipe is generally specified by a nominal diameter with a constant outside diameter (OD) and a schedule that defines the thickness. Tube is most often specified by the OD and wall thickness, but may be specified by any two of OD, inside diameter (ID), and wall thickness. Pipe is generally manufactured to one of several international and national industrial standards.[1] While similar standards exist for specific industry application tubing, tube is often made to custom sizes and a broader range of diameters and tolerances. Many industrial and government standards exist for the production of pipe and tubing. The term "tube" is also commonly applied to non-cylindrical sections, i.e., square or rectangular tubing. In general, "pipe" is the more common term in most of the world, whereas "tube" is more widely used in the United States.

There are three processes for metallic pipe manufacture. Centrifugal casting of hot alloyed metal is one of the most prominent processes. Ductile iron pipes are generally manufactured in such a fashion. Seamless (SMLS) pipe is formed by drawing a solid billet over a piercing rod to create the hollow shell. Seamless pipe withstands pressure better than other types, and is often more easily available than welded pipe. Welded (also Electric Resistance Welded ("ERW"), and Electric Fusion Welded ("EFW")) pipe is formed by rolling plate and welding the seam. The weld flash can be removed from the outside or inside surfaces using a scarfing blade. The weld zone can also be heat treated to make the seamless visible. Welded pipe often has tighter dimensional tolerances than seamless, and can be cheaper if manufactured in the same quantities. Large-diameter pipe (25 centimetres (10 in) or greater) may be ERW, EFW or Submerged Arc Welded ("SAW") pipe. 

Stainless Steel Pipes and Tubes
Carbon Steel Pipes and Tubes
Alloy Steel Pipes and Tubes